Skip to content

SODIMAS · Platform

SD20 doors — landing and car, spare parts

SD20 is SODIMAS’s standard door range, redesigned on the occasion of the entry into force of the EN 81-20/50 standard. It covers the landing door and the car door, with two leaves, in side or centre opening.

Its design favours robustness: 15/10 sheet metal, 30/10 carriages, reinforced mechanism on a solid steel guide rail, reinforced leaves and baffled link between leaves. The basic version meets EN 81-71 category 1, which deals with resistance to vandalism.

Quiet operation comes down to two choices: large-diameter steel rollers coated with polyurethane, and large-section guide shoes running in a standard, easy-to-maintain sill.

Technical sheet

Technical specifications

Configuration
Two leaves · Side or centre opening · Landing door and car door
Standards
Designed for EN 81-20/50 · Basic version compliant with EN 81-71 category 1
Clear opening (PL)
700, 800, 900, 1000, 1100, 1200 and 1300 mm
Clear height (HL)
2000, 2100, 2200 et 2300 mm
Height footprint (HR)
1000 to 1600 mm depending on the clear opening
Frontage footprint (FC)
1300 to 2000 mm depending on the clear opening
Modernisation
210 mm lintel
Construction
15/10 thick sheet metal · 30/10 thick sheet-metal carriages · Reinforced mechanism with solid steel guide rail · Reinforced leaves · Baffled link between leaves
Guidance
Large-diameter steel rollers coated with polyurethane · Large-section guide shoes · Standard sill, easy maintenance
Material
AISI 304 stainless steel
Car door control
SLYCMA SD-01 linear operator board · Also compatible with RHEA, GAIA and JET-S doors
Manufacturer warranty
3 months

Installation architecture

Parts are divided into four zones. Identifying the zone concerned is the first diagnostic reflex: it immediately narrows down the possible references.

Suspension mechanism

Solid steel guide rail, 30/10 sheet-metal carriages and polyurethane-coated steel rollers. It is this assembly that determines noise and smoothness of operation.

Related parts: SD20 rail · roller · carriage

Sill and low guidance

Large-section shoes running in the sill. The cleanliness of the grooves determines the absence of jamming when closing.

Related parts: SD20 sill · shoe · slider

Locking

Landing locks, cams and contacts. The SD20 locking device is subject to type examination.

Related parts: SD20 lock · cam · door contact

Operator and control

The SLYCMA SD-01 linear operator board drives the car door. It is supplied factory-configured.

Related parts: operator · SD-01 board · belt

Points of attention

  • Critical point on setup: SD20 doors are delivered with the basic settings for **sheet-metal** leaves. For **glass** leaves, an adjustment of the operator board settings is necessary — otherwise the factory setting is not suitable.
  • Note the clear opening and clear height before any order: they determine the height and frontage footprint, and therefore the compatibility of most parts.
  • Tell side opening from centre opening: rails, leaves and mechanisms are not interchangeable between the two.
  • The SLYCMA SD-01 operator board also equips RHEA, GAIA and JET-S doors: the same board can therefore be found on doors of very different appearance. State the type of door, not just the board reference.
  • In modernisation, the 210 mm lintel is the checkpoint: it determines whether the replacement is feasible without reworking the masonry.
  • The board has many parameters, but the factory setting is enough in most cases: only intervene if the door’s behaviour really requires it.

Get a quote

State the part reference if you know it, the number of levels and accesses of the unit, the type of wiring and your wilaya. A photo of the part in place and its markings confirms the match. KMY confirms the final price, availability and delivery time in Algeria.

Search all Portes SD20 parts in the catalogue ↗

Source of the specifications: SODIMAS SD 20 range booklet, SLYCMA SD-01 linear operator board manual ref. 27SO021P00111FR (25/11/2019) and SD locking device examination certificate ref. 0060-IV-A-021P-02-2017 REV01. Data reproduced for information only; only the manufacturer’s documentation is authoritative. Specifications may change between versions.

FAQ

Frequently asked questions about SD20 doors

What is the SODIMAS SD20 door?

SD20 is SODIMAS’s standard door range, with two leaves, in side or centre opening, available as a landing door and a car door. It was designed on the occasion of the entry into force of the EN 81-20/50 standard and its basic version meets EN 81-71 category 1.

What clear openings exist in SD20?

From 700 to 1300 mm in 100 mm steps, for clear heights of 2000, 2100, 2200 or 2300 mm. The height footprint ranges from 1000 to 1600 mm and the frontage footprint from 1300 to 2000 mm depending on the chosen clear opening.

Why is the SD20 door reputed to be quiet?

Two elements contribute to this: large-diameter steel rollers coated with a polyurethane band, and large-section guide shoes that ensure smooth sliding in the sill. The solid steel guide rail also limits vibration.

Does the operator board need adjusting for glass leaves?

Yes. SD20 doors are delivered with the settings corresponding to sheet-metal leaves. If your door is fitted with heavier glass leaves, an adjustment of the SLYCMA SD-01 board settings is necessary. It is a frequent cause of abnormal behaviour after installation.

Does the SD-01 board equip other doors?

Yes, the SLYCMA SD-01 linear operator board is also used on RHEA, GAIA and JET-S doors. When ordering, therefore, state the type of door and not only the board reference.

A reference to find? Send us the marking on your part.

Let’s talk. Our teams reply within 48 hours with a first estimate.

Request a quote