Skip to content

SODIMAS · Platform

QI Touch SODIMAS — spare parts and features

QI Touch is the control and command electronics developed by SODIMAS for lifts. It is intended for new units as well as modernisations, and covers traction, geared winch and hydraulic drives.

Its distinguishing feature is its interface: an on-board colour touchscreen with online help, which replaces the segment displays and key combinations of previous generations. Commissioning is guided by a step counter, from selection in the machine room to motor, position, speed and weighing learning.

On the wiring side, QI Touch accepts both CAN and wired links indifferently, and allows mixing them at the landing as well as in the car. This is what makes the range frequent in renovation: part of the existing wiring is kept.

Technical sheet

Technical specifications

Standard
EN 81-20 compliant
Types of installation
Traction drive · Geared winch · Hydraulic · New or modernisation
Power supply
24 V continu (± 6 % en charge) · Consommation 0,6 A à 5 A
Safety chain
48 to 220 V AC
Interface
3.5-inch colour touchscreen · On-board help · Single menu whatever the connection type
Network
Dual CANopen network: one selection/drive bus, one landings bus · Mixable CAN and wired links · Local web server, Wi-Fi, update by USB key
Controllers supported
Lock-out · Down collective · Full collective · 2 to 40 levels (40 CAN nodes) · 10 levels in wired full collective
Drive
Universal asynchronous motor drive (open or closed loop) · Universal synchronous motor drive · Brake management for all voltages · Speed up to 4 m/s
Positioning
Absolute or re-levelling position sensor · "Direct approach" ramps or classic two-speed ramps · Short inter-level: 30 mm in closed-loop gearless, 100 mm in open loop
Doors
Car: standalone, VVVF, or adaptation on existing · 1 or 2 accesses · Landing: automatic or manual, selection per level · Electro-cam management for all voltages
Traffic
Master/slave duplex · Multiplex up to 6 cars per call concentrator, with traffic analysis
Signalling
LCD with pictograms and logo · 7-segment displays · Direction arrows and next departure · 3-tone gong · Voice synthesis
Functions
Early opening · Levelling with door open · Fire detection (U36) · Accessibility EN 81-70 · Firefighter EN 81-72 · Remote alarm EN 81-28 · EN 81-21 and EN 81-212 · In-car load management · Timed or fixed car lighting

Installation architecture

Parts are divided into four zones. Identifying the zone concerned is the first diagnostic reflex: it immediately narrows down the possible references.

Power cabinet

It houses the QI Touch motherboard, the drive, the protections and the power supply. The DTU panel is sized according to the installation’s current, from 16 to 150 A.

Related parts: motherboard · DTU panel · cabinet · UPS · power supply

Shaft

Shaft wiring links the controller to the landings and the position sensors. Depending on the configuration, the landing wiring is plug-in or wired, which changes the CAN addressing.

Related parts: wiring · shaft duct · sensor · magnet · bistable

Car roof

The main CAN board on the car roof drives the on-board devices. An extension board handles the second access, the pit and the drive interface.

Related parts: car roof board · extension board · connector

Car and landings

Landing boards, button panels, indicators and signalling are connected to the bus dedicated to landings.

Related parts: landing board · faceplate · display · button · repeater box

Points of attention

  • CAN addressing must be redone after any change in the number of levels or doors, and after any change in the type of shaft wiring.
  • A QI Touch board can be supplied blank or programmed: an unprogrammed board does not replace a board programmed with the installation’s software.
  • Back up the configuration before any intervention: the manual provides a dedicated function, which avoids redoing all the learning steps.
  • The eight commissioning steps (machinery and selection, doors, motor learning, position, speed, Solimax and load weighing) must be redone in order after replacing the motherboard.
  • Check the safety chain voltage of your installation: QI Touch accepts 48 to 220 V AC, but the board must be configured accordingly.

Get a quote

State the part reference if you know it, the number of levels and accesses of the unit, the type of wiring and your wilaya. A photo of the part in place and its markings confirms the match. KMY confirms the final price, availability and delivery time in Algeria.

Search all QI Touch parts in the catalogue ↗

Source of the specifications: SODIMAS QI Touch technical documentation, ref. 27SO021P00060FR (06/09/2024). Data reproduced for information only; only the manufacturer’s documentation is authoritative. Specifications may change between versions.

FAQ

Frequently asked questions about QI Touch

What is the SODIMAS QI Touch controller?

QI Touch is SODIMAS’s lift control and command electronics, compliant with EN 81-20. It drives the motor, doors, signalling and safety devices, and stands out for its colour touchscreen with on-board help. It suits new installations as well as modernisations, in traction as in hydraulic.

Is QI Touch suitable for a modernisation?

Yes. It is even one of its main uses: it accepts CAN and wired links and allows mixing them at the landing and in the car, which makes it possible to keep part of the existing wiring. It also handles adaptation to an existing door operator.

How many levels can QI Touch serve?

From 2 to 40 levels over CAN link, i.e. 40 nodes. In wired full collective, the limit is 10 levels. In multiplex, up to 6 cars can be managed by a call concentrator with traffic analysis.

What power supply does the QI Touch board require?

24 V continu avec une tolérance de ± 6 % en charge, pour une consommation comprise entre 0,6 A et 5 A. La chaîne de sécurité est acceptée de 48 à 220 V alternatif.

How do I identify the right QI Touch part for my lift?

Note the reference written on the board or part to replace, the number of levels and accesses, the type of wiring (CAN or wired, plug-in or not) and the type of drive. A photo of the board and its markings allows KMY to confirm the match before ordering.

A reference to find? Send us the marking on your part.

Let’s talk. Our teams reply within 48 hours with a first estimate.

Request a quote